P 30 Cal (.308) 165Gr Balistix HunTac 50's

Projectile 30 (308) 165Gr Balistix HunTac50's

Balistix Bullets is the first and only South African manufacturer to produce a bullet that has a rebated boat tail design.Is treated with Hexagonal Boron Nitrate.Supports the worldwide shift towards monolithic copper production, which is more environmentally friendly.

1. Bullet Manufacturing
• Consistent geometry (CNC manufactured).
• Mid SAAMI tolerance on diameter (± 3,5 Micron (µm) maximum on manufacturing).

2. Technical Features of Bullet
2.1 Material
• Pure copper (>99,5% copper).
• Environmentally friendly (lead free).
• Aligned with international trends (embargo on leaded ammunition).
• Specific gravity of pure copper is 10 – 15% less than equivalent lead core bullets. The monolithic bullet is lighter than the equivalent length lead core bullet, therefore increased velocity is achievable.
• By selecting the appropriate monolithic bullet for a given twist rate, a flatter trajectory may be achievable compared to the lead core alternative. Follow manufacturer’s recommendation on selecting an appropriate bullet weight for the rifle’s twist rate.

2.2 Rebated Boat Tail
• Deflected gas flow away from the bullet during bullet exit at crown, ensuring less turbulent gas conditions in front of the bullet.
• Up to 15% increase in precision and accuracy compared to conventional boat tail design.
• Flat base bullet precision and accuracy with boat tail BC benefits.
• Boat tail angle conforms to the popular industrial standard for optimised BC.

2.3 Ogive
• Tangent Ogive design which is less “jump” sensitive.
• Ogive is not off a “bore rider” design, i.e. the ogive engages with the lands.
• Bullet is “tunable” for precision (i.e. jump adjustable).
• Bullet position in case can be measured with ogive comparator tools.
• Both a “target” and “hunting” ogive designs available. Same impact point.

2.4 Bearing Surface
• Designed within SAAMI tolerances.
• Improved low friction drive band design which results in:
– Minimum copper fouling
– Low pressure characteristics

3. Hexagonal Boron Nitrate (HBN)
Hexagonal Boron Nitrate is widely used in industrial applications due to its excellent dry lubricating properties and ultra-high-temperature abilities. Hexagonal Boron Nitrate has the best combination of high temperature resistance and lubricating properties, out of all solid lubricants available today.

3.1 Excellent Lubrication
• HBN application results in less fouling and less pressure compared to untreated monolithic bullets.
• Reduced extreme velocity spread and therefore improved precision and accuracy.
• Improved accuracy between cold bore and follow-up shots. Further reduces elevation dispersion.

Balistix “HunTac” Bullet:
HunTac bullets provide a true multipurpose capability for both Hunting as well as Tactical applications. The shorter ogive design allow for better use in repeater actions magazines, hence the “tactical” reference. The “open tip” design promotes bullet expansion when used for hunting. HunTac bullets are similar in design as our Target bullets and therefore similar load data is applicable to both bullet designs. The Target bullet provides for a more cost effective load development option for using the HunTac bullet. HunTac bullets provides exceptional accuracy and ease of tuning.

G1 BC:
• Mathematically calculated at Mach 2.5. G1 BC is derived from a flat base design model and should not be used for long range ballistic trajectory calculations. G1 BC is however sufficient for short range (up to 300m) shooting.

G7 BC:
• Mathematically calculated at Mach 2.5. G7 BC should preferably be used for a boat tail bullet design therefore more applicable to Balistix bullets.

Actual BC:
• Please note that actual BC is drastically influenced by muzzle velocity and atmospheric conditions. Please follow the procedure on our website in order to determine the exact BC for your rifle. (www.balistixbullets.com)

RBT:
• A Rebated Boat Tail bullet combines flat base bullet accuracy properties with boat tail BC enhancements. International studies have shown that a Rebated Boat Tail design can yield an increase in accuracy of up to 15% compared to conventional boat tail designs.
SG (Gyroscopic Stability Factor):
SG < 1.0 = unstable and should not be used.
SG 1.0 to 1,5 = marginally stable*. This is a “grey zone” and tests with your rifle and bullet combination will reveal a stability problem or not.
SG > 1,5 = perfectly stabilised.

Bullet Type: HunTac
Bullet Calibre: .30"
Bullet Weight: 165gr
Quantity per package: 50 off
G1 Ballistic Coefficient: 0.4
G7 Ballistic Coefficient: 0.2
Typical Barrel Twist Rate: 11
Stability Factor at Sea Level and 20ºC: 1.62
Stability Factor at Highveld (1400m) and 20ºC: 1.92